Cisco 7513 Series Bakım - Sayfa 8

Ağ Donanımı Cisco 7513 Series için çevrimiçi göz atın veya pdf Bakım indirin. Cisco 7513 Series 20 sayfaları. Chassis replacement
Ayrıca Cisco 7513 Series için: Hızlı Başlangıç Kılavuzu (44 sayfalar), Değiştirme Talimatları Kılavuzu (26 sayfalar), Veri Sayfası (11 sayfalar), Manuel (30 sayfalar), Değiştirme Talimatları Kılavuzu (19 sayfalar), Değiştirme Talimatları Kılavuzu (22 sayfalar)

Maintenance Procedures for the Cisco 7513, Cisco 7513-MX, and Cisco 7576

Figure 7-5

Figure 7-6

Chassis

interface

board B

Step 5

Remove the old EEPROM devices from the old card cage. Note where pin 1 is and use it as a reference

insertion point. Immediately install the old EEPROM devices on the EEPROM sockets on your new card

cage. (See

Install the blank EEPROM devices)(that you removed from your new card cage and marked with tape)

Step 6

on the EEPROM sockets on your old card cage; remove the small piece of tape from the blank EEPROM

devices. Return the old card cage to Cisco Systems.

Repeat Step 5 and Step 6 for the second EEPROM in the Cisco 7576.

Step 7

This completes the procedure for exchanging the EEPROM devices, which is required only if you

exchange your existing card cage assembly for a new one.

Cisco 7500 Series Installation and Configuration Guide

7-8

Location of the EEPROM Device on the Rear of the Card Cage (Cisco 7513 and

Cisco 7513-MX)

EEPROM

device

Pin 1

Location of the EEPROM Devices on the Rear of the Card Cage

(Cisco 7576)

EEPROM B

Pin 1

Figure 7-5

for the Cisco 7513 and Cisco 7513-MX, and

Chapter 7

Maintaining Your Cisco 7513, Cisco 7513-MX, and Cisco 7576 Router

Chassis

interface

board

Chassis

interface

board A

EEPROM A

EEPROM device

Figure 7-6

for the Cisco 7576.)

OL-5008-03 B0