Cisco 8540 - Catalyst Campus Switch Router Modular Expansion Base Manuel
Ağ Donanımı Cisco 8540 - Catalyst Campus Switch Router Modular Expansion Base için çevrimiçi göz atın veya pdf Manuel indirin. Cisco 8540 - Catalyst Campus Switch Router Modular Expansion Base 11 sayfaları. Installing the controller
Ayrıca Cisco 8540 - Catalyst Campus Switch Router Modular Expansion Base için: Sorun Giderme Kılavuzu (23 sayfalar)
Sayfayı Yazdır
Installing the Controller
This chapter describes how to install the controller.
Warning
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work
on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard
practices for preventing accidents. Use the statement number provided at the end of each warning to locate
its translation in the translated safety warnings that accompanied this device.
Statement 1071
SAVE THESE INSTRUCTIONS
•
•
•
•
•
Unpacking and Inspecting the Controller
Caution
When handling internal controller components, wear an ESD strap and handle modules by the carrier edges
only.
Tip
Keep the shipping container in case the controller requires shipping in the future.
Note
The chassis is thoroughly inspected before shipment. If any damage occurred during transportation or any
items are missing, contact your customer service representative immediately.
Unpacking and Inspecting the Controller, on page 1
Preparing for Controller Installation, on page 2
Installing the Controller In a Rack, on page 5
Initial Controller Setup , on page 9
System BIOS and Cisco IMC Firmware, on page 9
Installing the Controller
1