Cisco Aironet 1250 Series Manuel - Sayfa 19

Ağ Donanımı Cisco Aironet 1250 Series için çevrimiçi göz atın veya pdf Manuel indirin. Cisco Aironet 1250 Series 37 sayfaları. Aironet 1250 series
Ayrıca Cisco Aironet 1250 Series için: Yapılandırma Kılavuzu (40 sayfalar), Veri Sayfası (14 sayfalar), Donanım Kurulum Kılavuzu (10 sayfalar)

Sayfayı Yazdır

1. Configuring the Access Point

– Provide your organization's network administrator with your access

point MAC address. Your network administrator will query the

DHCP server using the MAC address to identify the IP address. The

MAC address is on a label attached to the bottom of the access

point.

– Use the CLI and serial port to identify the assigned IP address.

Connecting to the Access Point Locally

If you need to configure the access point locally (without connecting it to a

wired LAN), you can connect a PC to its console port by using a DB-9 to

RJ-45 serial cable.

Follow these steps to open the CLI by connecting to the access point console

port.

Step 1

Connect a nine-pin, female DB-9 to RJ-45 serial cable to the RJ-45

console port on the access point and to the COM port on the PC.

Step 2

Set up a terminal emulator on your PC to communicate with the

access point. Use the following settings for the terminal emulator

connection: 9600 baud, 8 data bits, no parity, 1 stop bit, and no flow

control.

Quick Start Guide: Cisco Aironet 1250 Series Access Point