Cisco Aironet 1250 Series Manuel - Sayfa 20

Ağ Donanımı Cisco Aironet 1250 Series için çevrimiçi göz atın veya pdf Manuel indirin. Cisco Aironet 1250 Series 37 sayfaları. Aironet 1250 series
Ayrıca Cisco Aironet 1250 Series için: Yapılandırma Kılavuzu (40 sayfalar), Veri Sayfası (14 sayfalar), Donanım Kurulum Kılavuzu (10 sayfalar)

Sayfayı Yazdır

1. Configuring the Access Point

Assigning an IP Address Using the CLI

When you assign an IP address to the access point using the CLI, you must

assign the address to the BVI. Beginning in a privileged EXEC mode, follow

these steps to assign an IP address to the access point BVI using the console

port:

Command

Step 1

enable

Step 2

configure terminal

Step 3

Interface bvi1

Step 4

ip address address mask Assigns an IP address and subnet mask

Step 5

end

Configuring Power

The access point receives power through the Ethernet cable or an external

power module. The following illustration shows the power options for the

access point.

Purpose

Enter privileged EXEC mode.

Enter global configuration mode.

Enters interface configuration mode

for the BVI.

address to the BVI.

Return to privileged EXEC mode.

78-17831-01