Argo Wallner RS6600-C Kullanım Kılavuzu - Sayfa 14

Kağıt Öğütücü Argo Wallner RS6600-C için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Argo Wallner RS6600-C 16 sayfaları.

Sayfayı Yazdır

serVice

Proceed only with routine actions according to the manual. Do not repair or service machi-

nes on your own. Unplug the machine from the circuit and contact seller when one or more

of the following faults occur:

•

liquid gets into the machine

•

machine malfunctions as a result of improper use

•

machine does not work accordingly to the manual

PrOBlem sOlViNG

problems

No operation

No operation after

long time operation

stop at shredding

excess squeaking

and rubbing noise

Paper jam

checklists

The power plug is properly

inserted to main supply?

switch is set at „i" position?

switch at „l" position but power

light off?

Basket at stand but power light

off?

No operation while inserting

paper?

checked above, but still no

operation and no power light?

Power lamp is on?

Machine was continuously

shredding for a longer time?

Without oiling to the cutting

system periodically,

- squeaking and rubbing noise at

shredding may appear.

- exceeding the shredding

capacity

- The paper is not fed squarely

into the feed opening.

solutions

Fully put the power plug to the

outlet.

set switch to „i" position for

operation.

check if the basket is out of

stand. Put basket back to stand.

Take the basket out, check the

plug and put it back to place.

Paper should be inserted to

trigger the sensor at center.

send back to your local service

for repair.

Unplug the machine from

main supply. allow to cool

down to room temperature

and resuming operation.

Unplug the machine from

main supply. allow to cool

down to room temperature

and resuming operation.

Perform the cutter oiling

instruction to lubricate the

cutting system.

set switch to „reverse" for

reverse running and to free

excess paper. Then set to „i" for

cutting the remainder of paper

left in the cutting system.

if serious jam occurred, send

back to local service for repair.