Cisco Aironet 340 Series Hızlı Başlangıç Kılavuzu - Sayfa 6

Ağ Donanımı Cisco Aironet 340 Series için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cisco Aironet 340 Series 12 sayfaları. Usb client adapter
Ayrıca Cisco Aironet 340 Series için: Hızlı Başlangıç Kılavuzu (12 sayfalar), Hızlı Başlangıç Kılavuzu (13 sayfalar), Sürüm Notları (14 sayfalar), Hızlı Başlangıç Kılavuzu (16 sayfalar), Hızlı Başlangıç Kılavuzu (12 sayfalar)

Installing the Console Port and Powering Up the Bridge

The console port and power connections are on the side of the bridge. The console connection

is required for setting up initial configuration information. After configuration is complete, you

may remove this cable unless or until additional configuration is required via the serial port.

1 2 -1 8 V D

Installing the Console Port Cable

Note: Use a straight-through cable with

9-pin male to 9-pin female connectors.

Attach the console port cable to the

console port on the bridge.

Attach the other end of the console cable

to the serial port on a terminal or PC

running a terminal emulation program.

Set the terminal to 9600 baud, 8 data

bits, No parity, 1 stop bit, and Xon/Xoff

flow control.

E /R S -2 3 2

C O N S O L

Power connector

On/off button

E/R S-2 32C

CO NS OL

12- 18 VD

Connecting Power to the Bridge

Connect the small plug on the end of the

power pack cord into the bridge power

port.

Plug the power pack into an electrical

outlet (120VAC/60 Hz or

90–264VAC/47–63 Hz, as appropriate).

Push the on/off button to power on the

bridge.

When power is initially applied to the

bridge, all three indicators on the top

panel will flash in sequence to test the

functionality of the indicators.

E /R S -2 3 2

C O N S O L

1 2 -1 8 V D

Console port