Cisco ASR 9000 Series Hızlı Referans Kılavuzu - Sayfa 4
Ağ Donanımı Cisco ASR 9000 Series için çevrimiçi göz atın veya pdf Hızlı Referans Kılavuzu indirin. Cisco ASR 9000 Series 7 sayfaları. Line card
Ayrıca Cisco ASR 9000 Series için: Ağ Ayarlarını Yapılandırma (26 sayfalar), Yapılandırma Kılavuzu (46 sayfalar), Yapılandırma Kılavuzu (50 sayfalar), Manuel (24 sayfalar), Yapılandırma (46 sayfalar), Manuel (44 sayfalar)
Sayfayı Yazdır
Cisco ASR 9000 Series
Line Card
Cable management brackets keep the
cables organized. Ensure cables from other
equipment installed in the rack do not
restrict access to the card cages.
To avoid noise interference in network
interface cables, do not route them directly
across or along power cables.
Cable management can be achieved by
routing the cables through the following
brackets:
1. Chassis cable management bracket.
2. Cable management tray.
Note: Use cable dust cap to protect the
cables from dust when the cables are
not in use.
© 2020 Cisco Systems, Inc. All rights reserved.
Chassis cable management bracket
Install the cable management bracket on one side of the
1
chassis.
Cisco ASR 9904 Router
Slot 4
Cable management bracket
Slot 1
Cable management tray
Each line card has its own cable routing divider in the
cable management tray. Route the cable or cable bundle
1
from the line card through the dividers of the cable
management tray.
Cisco ASR 9910 Router
Cable Management
2
Line card 3
Cable bundle
Line card 0
2
Hinged cover in raised position
Cable management tray
Dividers
Cable bundle routed
through the tray
Cable bundle routed
through the tray
Route the cable bundle from the line card through the cable
management bracket slot. Each line card has its own cable
routing slot.
Cisco ASR 9006 Router
Line card 3
(Cisco ASR 9010 Router) Raise the hinged cover to
increase access to the dividers.
Cisco ASR 9010 Router
2
Cable management tray
Cable management
bracket
Cable bundle
Slot 5
Slot 3
Line card 0
Dividers
4