Cisco ASR 9000 Series Hızlı Referans Kılavuzu - Sayfa 6

Ağ Donanımı Cisco ASR 9000 Series için çevrimiçi göz atın veya pdf Hızlı Referans Kılavuzu indirin. Cisco ASR 9000 Series 7 sayfaları. Line card
Ayrıca Cisco ASR 9000 Series için: Ağ Ayarlarını Yapılandırma (26 sayfalar), Yapılandırma Kılavuzu (46 sayfalar), Yapılandırma Kılavuzu (50 sayfalar), Manuel (24 sayfalar), Yapılandırma (46 sayfalar), Manuel (44 sayfalar)

Cisco ASR 9000 Series

Line Card

Packaging

Clean Environment

Operating Temperature

Packaging

While packing and transporting line cards or other modules, use only Cisco provided packaging. Any other improper packaging for

moving equipment may severely damage the product.

Repackage the components the same way as it was packaged at the time of product delivery by including all packaging materials.

Orienting the product incorrectly inside the package may cause damage to the product during transportation.

Always use the ESD cover to wrap the hardware before packing it into packaging cartons. Handle any failed hardware with care, and

use an ESD wrist band or an antistatic bag.

Clean Environment

Ensure that the chassis installation site is dust free.

Use filler cards in empty slots to prevent dust accumulation and to maintain proper airflow.

Always use dust caps on empty optical ports to prevent dust accumulation and airflow leakage.

Clean the optical ports according to standard cleaning procedures.

Maintain good air quality, and check air chemical composition at regular intervals. Impure air with high levels of chemical

concentration can cause corrosion that, in turn, would result in product degradation.

Operating Temperature

Operate the chassis only within the limits of the recommended temperature. For technical specifications, refer to the respective

product datasheet- click here.

Maintain normal operations by anticipating and correcting environmental anomalies before they approach critical values by properly

planning and preparing your site before you install the router.

If the temperature or power requirement of the line card or the chassis exceeds the operating temperature or power requirement,

a thermal shutdown procedure is initiated as applicable.

Maintenance Best Practices