Cisco CE 2000 Platform SCE 2000 4xGBE Hızlı Başlangıç Kılavuzu - Sayfa 17

Ağ Donanımı Cisco CE 2000 Platform SCE 2000 4xGBE için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cisco CE 2000 Platform SCE 2000 4xGBE 29 sayfaları. Service control engine

Sayfayı Yazdır
5
Cabling Line Ports
This chapter describes cabling the Gigabit Ethernet ports for both one and two SCE 2000 topologies, and for configuring
Gigabit Ethernet (GBE) interface parameters. In a topology utilizing two SCE 2000s (cascade), this includes the cascade ports
as well as the line ports.
Warning
Class 1 laser. Avoid exposure to radiation and do not stare into open aperture.
When installing a cascaded system, it is extremely important to follow the sequence of procedures outlined in
Note
"Installing a Cascaded System" section on page

SCE 2000 Connectivity Summary

Table 2 through Table 4 summarize SCE 2000 connectivity for basic topologies.
General Guidelines
• The SCE 2000 can be installed either inline or receive-only.
• Receive-only topologies use only receive fibers.
You can implement receive-only topologies using either an optical splitter or a switch. If you use a switch, it must
Note
support SPAN functionality that includes separation between ingress and egress traffic and multiple SPAN-port
destinations.
• Subscriber and Network sides are indicated on the front panel of the SCE 2000.
Table 2
Single Link Connectivity
Port
Either GBE-1 or GBE-2
Table 3
Dual Link Connectivity
Port
GBE-1
GBE-2
Table 4
Cascade Connectivity
This port on SCE 2000 #1
GBE-1
GBE-2 SUB (cascade port)
GBE-2 NET (cascade port)
This port on SCE 2000 #2
GBE-1
GBE-2 SUB (cascade port)
GBE-2 NET (cascade port)
Link
Link 0
Link
Link 0
Link 1
Connects to this...
Subscriber and network side network elements as indicated on the front panel
GBE-2 NET on SCE 2000 #2
GBE-2 SUB on SCE 2000 #2
Connects to this....
Subscriber and network side network elements as indicated on the front panel
GBE-2 NET on SCE 2000 #1
GBE-2 SUB on SCE 2000 #1
19.
17