Digitone DCB Plus Kullanıcı El Kitabı - Sayfa 7

Telefon Aksesuarları Digitone DCB Plus için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Digitone DCB Plus 16 sayfaları. Automatically blocks and routes screened calls with caller id

Sayfayı Yazdır

Programming Numbers - Invited, VIP and Blocked

Global Invite (Factory Default) Invites all callers who display a valid phone number

You can invite all callers who display a phone number and yet block a single number or area code. This

one command will allow all Invited callers who display a phone number to ring through to the TEL phone

port and all other devices connected directly to the phone line. To do this, enter programming with the

Program Button. Press and hold the Program Button for 3 seconds until you see "Program Mode", then

"Pick Up Phone", when the prompt for "Enter Code" displays enter 96 # *, display shows function. All

callers in this list are considered Invited, but not VIP callers who are in a separate list.

Inviting Individual Callers

You can program in individual callers like family, friends and business associates, who can ring through

during normal hours, but not during After Hours Mode by using the Program Button on the front panel.

Note that all callers with valid phone numbers are normally invited, so you don't need to invite callers one

at a time. If you are using the Global Block Method Code 97#*, then this feature is useful for inviting

callers that would otherwise be blocked. To enable this feature, press and hold the Program Button for

3 seconds until you see "Program Mode", then "Pick Up Phone", when the prompt for "Enter Code"

displays enter 50 to store a full number, minimum 7 digits to 16 digits in length followed by the * key.

Example for an Invited number enter: 50, 602 555 1212 *. Store up to 50 numbers or area codes.

Inviting VIP Callers

You can program in specific VIP callers like family, friends and business associates, who can ring through

at any time by using the Program Button on the front panel. To enable this feature, press and hold the

Program Button for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the prompt

for "Enter Code" displays enter 60 to store a full number, minimum 7 digits to 16 digits in length followed

by the * key.

Example for a VIP number enter: 60, 602 555 1212 * or for a VIP area code enter: 60,

602 ### #### *, display shows function. Store up to 50 numbers or area codes.

Inviting Area Codes

You can program in specific Invited area codes using the Program Button on the front panel. To enable

this feature, press and hold the Program Button for 3 seconds until you see "Program Mode", then

"Pick Up Phone", when the prompt for "Enter Code" displays enter 50 to store an area code followed by

the # key 7 times, then the * key.

The # key is used as a wildcard replacement for any number.

Example for Invited area codes enter: 50, 602 ### #### *, display shows function. Store up to 50

area codes.

Inviting Callers within a Blocked Area Code

Invited callers within a blocked area code can only be added using programming Code 52, and not by

using the Invite button. To Invite a number within a blocked area code, press and hold the Program

Button for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the prompt for "Enter

Code" displays enter 52 to store a full 10 digit number followed by the * key. Example: 52, 602 555

1212 *, display shows stored function. Store up to 10 numbers in one or more area codes.

Blocking Individual Callers

To Block specific individual callers, press and hold the Program Button for 3 seconds until you see

"Program Mode", then "Pick Up Phone", when the prompt for "Enter Code" displays enter 40 to store a

number of your Blocked caller followed by the 10 digit number, then the * key. Example for a Blocked

number enter: 40, 602 555 1212 *, display shows function. Store up to 140 numbers.

Blocking Area Codes

To Block specific area codes, press and hold the Program Button for 3 seconds until you see "Program

Mode", then "Pick Up Phone", when the prompt for "Enter Code" displays, enter 40 to store an area code

followed by the * key. Also, the # key can be used as a wildcard replacement for any number. Ex. for a

Blocked area code and exchange enter: 40, 602 555 #### *, display shows function. Area codes are

displayed as just the area code and are included in the 140 number limit stored. Calls that start with a

Country Code, like 1 (USA) means you must enter the entire string into a blocked number. Example: to