Digitone DCB Plus Kullanıcı El Kitabı - Sayfa 8

Telefon Aksesuarları Digitone DCB Plus için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Digitone DCB Plus 16 sayfaları. Automatically blocks and routes screened calls with caller id

Sayfayı Yazdır

block the entire 800 and 1-800 area codes, enter: 40 800 ### #### *, then 40 1 800 ### #### *.

You will then see area codes 800 and 1800 in the Blocked Callers List. Store up to 140 area codes.

Global Block Method - Code 97 #*

"I want to Block all callers and just allow certain numbers".

Note from the factory, all callers with a number displayed are already invited and can ring through, but

you can create your own caller list by disabling the Global Invited List. You can then invite preferred

callers using the Invite Button on the front panel or through programming. To enable this feature, press

and hold the Program Button for 3 seconds until you see "Program Mode", then "Pick Up Phone", when

the prompt for "Enter Code" displays enter 97 #*, display shows function. NOTE: that when Code 97

#* is stored, all calls will be Blocked, answered and hungup on until you add Invited numbers.

When

the prompt for "Enter Code" displays, enter 50 or 60 (VIP) to store an invited number or area code, then

the * key. Ex. for individual numbers enter: 60, 602 555 1212, or for area codes enter: 50, 602 ###

#### * display shows function. Store up to 50 numbers or area codes using Code 50 and up to 50

numbers or area codes using Code 60. Total of 100 invited numbers or area codes can be stored.

Deleting Invited, VIP or Blocked Numbers

To delete a single number you have stored, enter programming: press and hold the Program Button

for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the prompt for "Enter Code"

displays enter 98, enter the phone number you want to delete followed by the * key. Example for

deleting a number enter: 98, 602-555-1212 *, display shows function.

Caller List Deletion

WARNING: This will delete all numbers from all lists! To delete ALL numbers stored, enter

programming: press and hold the Program Button for 3 seconds until you see "Program Mode", then

"Pick Up Phone", when the prompt for "Enter Code" displays, enter 98 # *, display shows: "ALL NBR

DELETED". All numbers stored from all lists will be cleared.

Operating Modes

You can switch between the operating modes using the programming button and by entering one of the

mode numbers. The DCB Plus can toggle between the modes Standard, Business, Standby or Select

using one of the settings below. Note: After Hours Mode runs together with Standard, Business or Select

Mode when either mode is enabled. Mode settings are displayed only when entering Programming Mode.

Standard (default) Mode = Code 30

When calls come in, all phone numbers that are Invited will ring phones throughout your home/office like

normal and to the TEL phone port on the back of the DCB Plus, except for Anonymous, Out Of Area,

Private and Unknown callers showing no phone number. These calls will be answered by the DCB

Plus for processing and by default be hung-up on unless program Code 72 is enabled to allow these call

types to ring in. Blocked callers will be immediately answered and after eight seconds, get hung-up

on. To enable this (default) Mode, press and hold the Program Button for 3 seconds until you see

"Program Mode", then "Pick Up Phone", when the prompt for "Enter Code" displays enter 30, display

shows function. You can use Code 76 to override the block function for Out of Area + no number call

types or Code 74 to override the block function for Private + no number call types. These two codes will

allow those callers you need to hear from Out of Area (overseas) or Private (neighbors) to ring through.

You can also use Code 52 to invite up to 10 callers within a blocked area code.

Business Mode = Code 31

If you are running a business and want to hear from Anonymous, Out Of Area, Private and Unknown

callers as well as any other type of call, you can enable Business Mode Code 31 to allow calls through to

the TEL phone port except those you want to block. This mode also works with your phone company's

voice mail but also blocks those phone numbers you have entered into the Blocked Callers List. Blocked

callers will be immediately answered and after eight seconds get hung-up on. To enable this Mode,

press and hold the Program Button for 3 seconds until you see "Program Mode", then "Pick Up Phone",

when the prompt for "Enter Code" displays enter 31, display shows function.