Digitrax SoundFX SDXN146K1E Manuel - Sayfa 2

Medya Dönüştürücü Digitrax SoundFX SDXN146K1E için çevrimiçi göz atın veya pdf Manuel indirin. Digitrax SoundFX SDXN146K1E 12 sayfaları.

Parts List

1 SDXN146K1E Function Decoder with SoundFX

1 Instruction Sheet

See the Digitrax Decoder Manual for complete decoder test procedures, instal-

lation instructions, programming and technical information. Digitrax manuals

and instructions are updated periodically. Please visit www.digitrax.com for the

latest versions, technical updates and additional locomotive-specific installation

instructions. CAUTION: Programming and layout track must not exceed

16V when using this decoder.

Carefully remove the Locomotive shell.

Remove the Factory Light board by sliding it back and up. Remove the facto-

ry motor clips from the light board.

Attach the motor clips to the SDXN146K1E board. The motor clips may re-

quire some manipulation to ensure a sung fit and can be soldered if desired.

Motor Clips

Figure 1: SDXN146K1E: Locomotive with light board and motor clips removed

Reinstall the SDXN146K1E by sliding it under the retention tabs on the

frame. Ensure that the motor clips are in contact with the motor tabs on the

locomotive. Also ensure the motor clips are NOT in contact with the Loco-

motive frame, insulating tape may be needed in the motor saddle area.

Slide the speaker under the rear extended LED and place the capacitor inside

the Cab-clip cavity. Double sided tape can be used to help hold these items

in place. Fold and shape any excess wire so that it lays flat. See Figure 2 to

see completed installation.

Motor Tab

Motor Saddle Area

— 2 —

Cab-clip