Digitroll DMS 08 LCD Kullanıcı Kılavuzu - Sayfa 14

Kontrol Sistemleri Digitroll DMS 08 LCD için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Digitroll DMS 08 LCD 16 sayfaları. Seeding control system

Sayfayı Yazdır

THE MONITOR INDICATES BLOCKAGE AT A SEED

MODULE FOLLOWING TEST AND EVEN AFTER CLEANING

Defected seed module.

Troubleshooting: insert a long stick inside the seed sensor. If LED gets dark for

a second: it works. If not: sensor is defected.

THE MONITOR INDICATES IRREGULAR SEED DROPS

WHEN SEEDER STOPPED

•

Seeds or seed fragments picked up accidentally by the air-flow are

detected by the seed sensor. Sensitivity was set too high – adjust higher

time limit to reduce sensitivity.

•

Sensor is defected

THERE IS NO SEED DETECTION AT A PROPERLY

WORKING SEEDER, TEST FINDS SEED MODULES, NO DUST

INDICATED

•

Small sized seeds at low rate seeding – adjustment to small seed size and

missing seed time interval to higher.

•

Module is defected, check it by blinking LED with a long stick inserted

inside.

TROUBLESHOOTING