Cisco PIX 501 Hızlı Başlangıç Kılavuzu - Sayfa 10

Ağ Donanımı Cisco PIX 501 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cisco PIX 501 20 sayfaları. Data sheet
Ayrıca Cisco PIX 501 için: Hızlı Başlangıç Kılavuzu (20 sayfalar), Veri Sayfası (8 sayfalar), Hızlı Başlangıç Kılavuzu (21 sayfalar), Hızlı Başlangıç Kılavuzu (18 sayfalar)

Alternative Ways to Access the PIX 501

You can use a serial terminal emulator from a PC or workstation connected to the Console port for

local administrative access.

You can also use PDM or a console to configure Telnet access to the PIX Firewall. By default, Telnet

access is not permitted. To Telnet to the PIX Firewall from the outside perimeter of the firewall,

configure an outside IP address and IPSec for a secure Telnet session. For more information, refer to

the Cisco PIX Firewall and VPN Configuration Guide.

PC terminal adapter

(74-0495-01)

Follow these steps to connect a console for local administrative access:

Plug one end of the console cable adapter (29-0810-01) into a standard 9-pin PC serial port.

Step 1

Plug one end of the blue console cable (72-1259-01) into the console cable adapter.

Step 2

Plug the other end of the blue console cable into the Console port.

Step 3

Configure the PC terminal emulation software or terminal for 9600 baud, 8 data bits, no

Step 4

parity, and 1 stop bit.

Refer to the Cisco PIX Firewall and VPN Configuration Guide for information about how to use the

command-line interface (CLI).

Blue console cable

P O W E R

C O N S O L

3 .3 V 4 .5

Cisco PIX 501