Cisco PIX 501 Manual de início rápido - Página 10

Procurar online ou descarregar pdf Manual de início rápido para Hardware de rede Cisco PIX 501. Cisco PIX 501 20 páginas. Data sheet
Também para Cisco PIX 501: Manual de início rápido (20 páginas), Ficha de dados (8 páginas), Manual de início rápido (21 páginas), Manual de início rápido (18 páginas)

Alternative Ways to Access the PIX 501

You can use a serial terminal emulator from a PC or workstation connected to the Console port for

local administrative access.

You can also use PDM or a console to configure Telnet access to the PIX Firewall. By default, Telnet

access is not permitted. To Telnet to the PIX Firewall from the outside perimeter of the firewall,

configure an outside IP address and IPSec for a secure Telnet session. For more information, refer to

the Cisco PIX Firewall and VPN Configuration Guide.

PC terminal adapter

(74-0495-01)

Follow these steps to connect a console for local administrative access:

Plug one end of the console cable adapter (29-0810-01) into a standard 9-pin PC serial port.

Step 1

Plug one end of the blue console cable (72-1259-01) into the console cable adapter.

Step 2

Plug the other end of the blue console cable into the Console port.

Step 3

Configure the PC terminal emulation software or terminal for 9600 baud, 8 data bits, no

Step 4

parity, and 1 stop bit.

Refer to the Cisco PIX Firewall and VPN Configuration Guide for information about how to use the

command-line interface (CLI).

Blue console cable

P O W E R

C O N S O L

3 .3 V 4 .5

Cisco PIX 501