Cisco 700 series Genel Bakış - Sayfa 10

Sunucu Cisco 700 series için çevrimiçi göz atın veya pdf Genel Bakış indirin. Cisco 700 series 19 sayfaları. Using profiles
Ayrıca Cisco 700 series için: Hızlı Başlangıç Kılavuzu (8 sayfalar), Başlangıç Kılavuzu (27 sayfalar), Kullanıcı Kılavuzu (9 sayfalar), Yönetim Kılavuzu (36 sayfalar)

Leased Line Authentication Requirement Removed

For 64-kbps or 128-kbps leased line connections, previous versions of the software required

PAP/CHAP authentication to identify the corresponding proﬁle. In software Release 4.0(1)

and higher, the authentication sequence is no longer required for leased line connections.

To eliminate the need for authentication, a user-deﬁned proﬁle named leasedline must be

present and deﬁned. If this proﬁle is not present upon call connect, the router requires

authentication to select the correct proﬁle. If the call cannot be authenticated, the router

defaults to the Standard proﬁle.

Within the user-deﬁned proﬁle called leasedline, verify that PPP authentication is set to

none. The switch types that support this feature are PERM64 and PERM128.

SNMP Support

Cisco 700 series routers support Simple Network Management Protocol (SNMP).

SNMP Community Names

Cisco 700 series routers support the following SNMP community names:

•

public

•

proxy

•

private

•

regional

•

core

These community names are read-only and cannot be changed. Cisco 700 series routers do

not support SNMP set commands.

1-10 Cisco 700 Series Router Installation Guide