Cisco AS5300 - Universal Access Server Manuel - Sayfa 3
Sunucu Cisco AS5300 - Universal Access Server için çevrimiçi göz atın veya pdf Manuel indirin. Cisco AS5300 - Universal Access Server 21 sayfaları. Access server
Ayrıca Cisco AS5300 - Universal Access Server için: Ekler (10 sayfalar), Hızlı Başlangıç Kılavuzu (25 sayfalar), Yapılandırma Kılavuzu (46 sayfalar)
Sayfayı Yazdır
•
RJ-45-to-DB-9 female DTE adapter (labeled TERMINAL)
•
RJ-45-to-DB-25 female DTE adapter (labeled TERMINAL)
•
RJ-45-to-DB-25 male DCE adapter (labeled MODEM)
•
RJ-45-to-RJ-45 rollover console cable
•
ESD-preventive wrist strap
•
Nylon cable tie
•
Cable tie holder
•
Grounding lug
You might need the following equipment, which is not included:
•
Four screws for installing the access server in a rack
•
Straight-through RJ-45-to-RJ-45 cable for an Ethernet connection
•
Ethernet hub or PC with a network interface card for Ethernet LAN connections
•
Up to four straight-through RJ-45-to-RJ-45 cables for T1 connections
•
Up to four E1 cables for E1 connections
•
PC running terminal emulation software for local administrative access
•
Modem for remote administrative access
Setting Up the Chassis
You can set the chassis on a desktop or install it in a rack. Use the procedure in this section that
best meets the needs of your network:
•
Setting the Chassis on a Desktop
•
Rack-Mounting the Chassis
Warning