Cisco AS5300 - Universal Access Server Manuel - Sayfa 4
Sunucu Cisco AS5300 - Universal Access Server için çevrimiçi göz atın veya pdf Manuel indirin. Cisco AS5300 - Universal Access Server 21 sayfaları. Access server
Ayrıca Cisco AS5300 - Universal Access Server için: Ekler (10 sayfalar), Hızlı Başlangıç Kılavuzu (25 sayfalar), Yapılandırma Kılavuzu (46 sayfalar)
Sayfayı Yazdır
When installing the unit, the ground connection must always be made first and disconnected last.
Warning
This unit is intended for installation in restricted access areas. A restricted access area is where
access can only be gained by service personnel through the use of a special tool, lock and key, or
other means of security, and is controlled by the authority responsible for the location.
Setting the Chassis on a Desktop
The location of the chassis is extremely important for proper operation. Equipment placed too
close together, inadequate ventilation, and inaccessible panels can cause malfunctions and
shutdowns, and can make maintenance difficult. The following information will help you to plan
the location of the chassis:
•
Plan for access to both front and rear panels of the chassis.
•
Ensure that the room where the chassis operates has adequate ventilation. Remember that
electrical equipment generates heat. Ambient air temperature may not cool equipment to
acceptable operating temperatures without adequate ventilation.
Attach the rubber feet as shown in . Rubber feet are included in the accessory kit that shipped
with your access server.
Figure 3-1 Attaching the Rubber Feet