Cisco Firepower 1120 Donanım Kurulum Kılavuzu - Sayfa 34

Sunucu Cisco Firepower 1120 için çevrimiçi göz atın veya pdf Donanım Kurulum Kılavuzu indirin. Cisco Firepower 1120 42 sayfaları. Connected grid router
Ayrıca Cisco Firepower 1120 için: Donanım Kurulum Kılavuzu (30 sayfalar), Kurulum Kılavuzu (6 sayfalar), Hızlı Başlangıç Kılavuzu (10 sayfalar), Manuel (6 sayfalar), Dağıtım Kılavuzu (8 sayfalar), Başlarken (42 sayfalar), Donanım Kurulum Kılavuzu (42 sayfalar)

Cisco Firepower 1120 Donanım Kurulum Kılavuzu
Connect to the Console Port with Microsoft Windows
Figure 25: Console Port Connection
1
USB Mini B console port
3
USB Type A
Step 4
Connect the end of the cable with the DB-9 connector (or USB Type A) to the terminal or PC. If your terminal or PC has
a console port that does not accommodate a DB-9 connector, you must provide an appropriate adapter for that port.
The LED for the console port turns green and within a few moments the Found New Hardware Wizard appears.
Step 5
Follow the instructions to complete the driver installation.
Step 6
To communicate with the chassis, start a terminal emulator application. This software should be configured with the
following parameters:
• 9600 baud
• 8 data bits
• no parity
• 1 stop bit
• no flow control
Cisco Firepower 1100 Series Hardware Installation Guide
30
2
USB Mini B to USB Type A console cable
Connect to the Console Port