Cisco Firepower 1120 Panduan Pemasangan Perangkat Keras - Halaman 34

Jelajahi secara online atau unduh pdf Panduan Pemasangan Perangkat Keras untuk Server Cisco Firepower 1120. Cisco Firepower 1120 42 halaman. Connected grid router
Juga untuk Cisco Firepower 1120: Panduan Pemasangan Perangkat Keras (30 halaman), Panduan Instalasi (6 halaman), Panduan Memulai Cepat (10 halaman), Manual (6 halaman), Panduan Penyebaran (8 halaman), Memulai (42 halaman), Panduan Pemasangan Perangkat Keras (42 halaman)

Connect to the Console Port with Microsoft Windows

Figure 25: Console Port Connection

USB Mini B console port

USB Type A

Step 4

Connect the end of the cable with the DB-9 connector (or USB Type A) to the terminal or PC. If your terminal or PC has

a console port that does not accommodate a DB-9 connector, you must provide an appropriate adapter for that port.

The LED for the console port turns green and within a few moments the Found New Hardware Wizard appears.

Step 5

Follow the instructions to complete the driver installation.

Step 6

To communicate with the chassis, start a terminal emulator application. This software should be configured with the

following parameters:

• 9600 baud

• 8 data bits

• no parity

• 1 stop bit

• no flow control

Cisco Firepower 1100 Series Hardware Installation Guide

USB Mini B to USB Type A console cable

—

Connect to the Console Port