Cisco Firepower 2140 Kurulum ve Bakım - Sayfa 18

Sunucu Cisco Firepower 2140 için çevrimiçi göz atın veya pdf Kurulum ve Bakım indirin. Cisco Firepower 2140 26 sayfaları. Rack-mount and ground the chassis
Ayrıca Cisco Firepower 2140 için: Manuel (12 sayfalar), Dağıtım Kılavuzu (8 sayfalar), Başlarken (42 sayfalar)

Sayfayı Yazdır

Remove and Replace the Fan Tray

Clamp release tabs

Step 4

If you need to remove the power cord, push the release tab on the clamp to force the annular clamp teeth to disengage

and the clamp opens up. You can then remove the clamp from the power cord.

Remove and Replace the Fan Tray

You can remove and replace the fan tray while the Firepower 2130 and 2140 are running. The air flow moves

from front to back. All fan modules are integrated in a single fan tray.

Caution

Safety Warnings

Warning

Installation, Maintenance, and Upgrade

Removing the fan tray exposes the appliance to no airflow. Replace the fan tray within 30 seconds after

removal to avoid overheating the appliance. If you wait longer than 30 seconds, the appliance may power off

automatically to prevent damage to components. The appliance does not power up and boot properly if the

fan tray is missing.

Take note of the following component replacement safety warnings:

Statement 1028 More Than One Power Supply

This unit might have more than one power supply connection. To reduce risk of electric shock, remove

all connections to de-energize the unit.

Statement 1030 Equipment Installation

Only trained and qualified personnel should be allowed to install, replace, or service this equipment.

Statement 1073 No User-Serviceable Parts

There are no serviceable parts inside. To avoid risk of electric shock, do not open.

Installation, Maintenance, and Upgrade

—