Cisco L2TP Manuel - Sayfa 7

Sunucu Cisco L2TP için çevrimiçi göz atın veya pdf Manuel indirin. Cisco L2TP 14 sayfaları.

Sayfayı Yazdır

L2TP Network Server

Required Information

RADIUS Accounting server

RADIUS attribute NAS Identifier

RADIUS NAS IP address

Default Subscriber Configuration

"Default" subscriber's IP context name

Destination Context Configuration

The following table lists the information that is required to configure the destination context.

Destination Context Configuration

Description

IP Address:

Specifies the IP address of the RADIUS accounting

server that the source context will communicate with

to provide subscriber accounting functions.

Multiple addresses are needed if multiple RADIUS

servers will be configured.

RADIUS accounting servers are configured within

the source context. Multiple servers can be configured

and each assigned a priority.

Shared Secret:

The shared secret is a string between 1 and 15

characters (alpha and/or numeric) that specifies the

key that is exchanged between the RADIUS

accounting server and the source context.

A shared secret is needed for each configured

RADIUS server.

UDP Port Number:

Specifies the port used by the source context and the

RADIUS Accounting server for communications. The

UDP port number can be any integer value between

1 and 65535. The default value is 1813.

Specifies the name by which the source context will

be identified in the Access-Request message(s) it

sends to the RADIUS server. The name must be

between 1 and 32 alpha and/or numeric characters

and is case sensitive.

Specifies the IP address of the source context's AAA

interface. A secondary IP address interface can

optionally be configured.

Specifies the name of the egress context on the system

that facilitates the PDN ports.

Important

For this configuration, the IP context name

should be identical to the name of the

destination context.

L2TP Network Server