Cisco L2TP Manuel - Sayfa 8

Sunucu Cisco L2TP için çevrimiçi göz atın veya pdf Manuel indirin. Cisco L2TP 14 sayfaları.

Sayfayı Yazdır

Destination Context Configuration

Table 2: Required Information for Destination Context Configuration

Required Information

Destination context name

PDN Interface Configuration

PDN interface name

IP address and subnet

Physical port number

Physical port description(s)

Gateway IP address(es)

IP Address Pool Configuration (optional)

IP address pool name(s)

L2TP Network Server

Description

This is an identification string between 1 and 79

characters (alpha and/or numeric) by which the

destination context will be recognized by the system.

Important

For this configuration, the destination

context name should not match the domain

name of a specific domain.

This is an identification string between 1 and 79

characters (alpha and/or numeric) by which the

interface will be recognized by the system.

Multiple names are needed if multiple interfaces will

be configured.

PDN interfaces are used to connect to a packet

network and are configured in the destination context.

These will be assigned to the PDN interface.

Multiple addresses and/or subnets are needed if

multiple interfaces will be configured.

A single physical port can facilitate multiple

interfaces.

This is an identification string between 1 and 79

characters (alpha and/or numeric) by which the

physical port will be recognized by the system.

Multiple descriptions will be needed if multiple ports

will be used.

Physical ports are configured within the destination

context and are used to bind logical PDN interfaces.

Used when configuring static routes from the PDN

interface(s) to a specific network.

If IP address pools will be configured in the

destination context(s), names or identifiers will be

needed for them. The pool name can be between 1

and 31 alpha and/or numeric characters and is case

sensitive.

L2TP Network Server