Cisco Nexus 7000 Series Sorun Giderme Kılavuzu

Sunucu Cisco Nexus 7000 Series için çevrimiçi göz atın veya pdf Sorun Giderme Kılavuzu indirin. Cisco Nexus 7000 Series 10 sayfaları. Switch chassis
Ayrıca Cisco Nexus 7000 Series için: Referans Kılavuzu (2 sayfalar), Kurulum Talimatları Kılavuzu (39 sayfalar), Referans (34 sayfalar), Kurulum Kılavuzu (18 sayfalar), Yapılandırma (8 sayfalar), Yapılandırma Kılavuzu (28 sayfalar), Hızlı Başlangıç Kılavuzu (10 sayfalar), Hızlı Başlangıç Kılavuzu (29 sayfalar), Değiştirme Talimatları Kılavuzu (14 sayfalar), Değiştirme Talimatları Kılavuzu (21 sayfalar), Kurulum Kılavuzu (16 sayfalar)

Troubleshooting

This chapter describes how to troubleshoot Cisco Nexus 7000 Series hardware problems.

This chapter includes the following sections:

If your system has problems related to the Cisco NX-OS operating system, see the Cisco NX-OS

Troubleshooting Guide. If you cannot isolate a system problem, contact the Cisco Technical Assistance Center

(TAC).

•

Start the Cisco Nexus 7000 Series switch by turning on the power at the power supply units to send power to

the system fans, supervisor module, fabric modules, and I/O modules. During the startup phase, the STATUS

LEDs on the supervisor and I/O modules are amber to indicate that the initialization process is in progress.

When the system is operational, the component LEDs indicate that either the system is operational or you

need to troubleshoot for system problems.

The key to troubleshooting the system is to isolate a problem to a specific system component. First, you

compare what the system is doing with what it should be doing. Look at the chassis LEDs to see if there are

any critical problems detected with the system components. Green chassis LEDs indicate that all components

of a type are operational while amber LEDs indicate that at least one component of a type has a critical problem

that requires troubleshooting.

For a listing of the system LEDs and the conditions that they indicate, see

Less critical problems, such as minor overtemperature conditions, are not indicated by the chassis LEDs. To

find those problems, you must look for amber STATUS LEDs on the system modules.

Depending on the type of component that needs troubleshooting, see one of the following topics:

Table D-1 on page D-1

Troubleshooting