Cisco UCS 5100 Kurulum - Sayfa 10

Sunucu Cisco UCS 5100 için çevrimiçi göz atın veya pdf Kurulum indirin. Cisco UCS 5100 17 sayfaları. Uplink ethernet connection
Ayrıca Cisco UCS 5100 için: Kurulum (4 sayfalar), Ürün Yazılımı Kılavuzu (10 sayfalar), Konfigürasyon (5 sayfalar), Manuel (14 sayfalar), Yükseltme Talimatları (10 sayfalar), Hızlı Başlangıç Kılavuzu (8 sayfalar), Yapılandırma Kılavuzu (6 sayfalar)

Sayfayı Yazdır
Cisco UCS 5100 Kurulum
4.2 Assign VSAN to FC Uplink Port in Fabric Interconnect (Alternate
Method)
Choose the FC port linked to your SAN network and assign this port to the VSAN created in the previous
step.
These FC Uplinks must already be provisioned with respective VSAN IDs on the SAN network side (MDS
switch).
1.
In the Navigation pane, choose the SAN tab.
2.
Expand SAN Cloud and then expand FC Uplinks − Fabric A.
3.
Expand Uplink FC Ports. In this test case, choose FC Port 2/1 that has connection to the upstream
SAN switch.
4.
Either right−click the desired FC port, or, in the Work pane to the right, click the port as shown.
5.
In the Properties pop−up window for FC Port 1, choose the VSAN to which this FC port will pinned
from the drop−down menu.
6.
Click OK.