Cisco UCS B200 Kurulum ve Servis Notu - Sayfa 21

Sunucu Cisco UCS B200 için çevrimiçi göz atın veya pdf Kurulum ve Servis Notu indirin. Cisco UCS B200 31 sayfaları. Blade server
Ayrıca Cisco UCS B200 için: Veri Sayfası (8 sayfalar)

Sayfayı Yazdır

S e n d d o c u m e n t c o m m e n t s t o u c s - d o c f e e d b a c k @ c i s c o . c o m

Figure 11

Close the socket latch. See

Step 2

Lock the socket latch into place with the hook. See

Step 3

Using the tube of thermal compound provided with replacement CPUs and servers (Dow-Corning

Step 4

TC-1996, Intel D54816-0 or an equivalent may also be used), add a protective film of thermal compound

to the bottom of the heat sink where it will contact the CPU. See

Replace the heat sink (N20-BHTS1). See

Step 5

Caution

For proper cooling, align the arrows on the installed heat sink to point to the front and back of the blade.

Make sure that the heat sink fins are aligned to run along the length of the blade server (see

Secure the heat sink to the motherboard by tightening the four captive screws. See

Step 6

Installing Memory

To install a DIMM into the B200 blade server, follow these steps:

Open both DIMM connector latches.

Step 1

OL-22473-02

Inserting the CPU and Replacing the Heat Sink

Figure

11, callout 2.

Figure

11, callout 3.

Figure

11, callout 5.

Cisco UCS B200 Blade Server Installation and Service Note

Removing a Blade Server Cover

Figure

11, callout 4.

Figure

11, callout 6.

Figure

11).