Cisco UCS B200 M4 Yükseltme Kılavuzu

Sunucu Cisco UCS B200 M4 için çevrimiçi göz atın veya pdf Yükseltme Kılavuzu indirin. Cisco UCS B200 M4 9 sayfaları. For e5-2600 v4 series cpus
Ayrıca Cisco UCS B200 M4 için: Kurulum ve Servis Notu (30 sayfalar), Kurulum ve Servis Notu (46 sayfalar), Servis Kılavuzu (24 sayfalar)

Sayfayı Yazdır

Cisco UCS B200 M4 Server Upgrade Guide for

E5-2600 v4 Series CPUs

First Published: June 20, 2016

Introduction

This document describes the process for upgrading a Cisco UCS B200 M4 Blade Server that is currently

running E5-2600 v3 CPUs to use Intel E5-2600 v4 Series CPUs. Minimum software support and upgrade and

downgrade scenarios are described, including the following:

•

Failure to follow the procedures in this guide when upgrading an existing server to use Intel E5-2600 v4

Caution

Series CPUs might result in a non-bootable server.

Minimum Software and Firmware Requirements

The minimum software and firmware versions that are required for the Cisco UCS B200 M4 blade server to

support Intel E5-2600 v4 Series CPUs are listed in the following table.

Table 1: Software and Firmware Minimum Version Requirements

Software or Firmware

Cisco UCS Manager

Server CIMC

Server BIOS

Upgrade Scenario: UCS Manager and the BIOS Software are Earlier Than the Minimum Supported

Release Version, and the Server has Intel E5-2600 v3 Series CPUs

Upgrade Scenario: UCS Manager and the BIOS Software are at the Minimum Supported Release Version,

and the Server has Intel E5-2600 v3 Series CPUs

Upgrade Scenario: UCS Manager Software is the Minimum Supported Release Version, the Server has

Intel E5-2600 v4 Series CPUs, and the BIOS Software is Earlier Than the Minimum Supported Release

Version

Minimum Version

Release 3.1(1) or 2.2(7) (See the following Note for information about

additional supported versions.)

Release 3.1(1) or 2.2(7)

Cisco UCS B200 M4 Server Upgrade Guide for E5-2600 v4 Series CPUs