Cisco UCS B200 M4 Servis Kılavuzu - Sayfa 19

Sunucu Cisco UCS B200 M4 için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Cisco UCS B200 M4 24 sayfaları. For e5-2600 v4 series cpus
Ayrıca Cisco UCS B200 M4 için: Kurulum ve Servis Notu (30 sayfalar), Kurulum ve Servis Notu (46 sayfalar), Yükseltme Kılavuzu (9 sayfalar)

Sayfayı Yazdır

Servicing a Blade Server

information, see the firmware management chapter of one of the Cisco UCS Manager software configuration

guides.

Procedure

Step 1

Position the adapter board connector above the motherboard connector and align the two adapter captive

screws to the standoff posts on the motherboard.

Step 2

Firmly press the adapter connector into the motherboard connector (callout 2).

Step 3

Tighten the two captive screws (callout 3).

Tip

Figure 16: Installing an Adapter Card

Installing the NVIDIA M6 GPU Adapter Card

The NVIDIA M6 graphics processing unit (GPU) adapter card provides graphics and computing capabilities

to the server. If you are installing the NVIDIA GPU to a B200 M4 in the field, the option kit comes with the

GPU itself (CPU and heat sink), a T-shaped installation wrench, and a custom standoff to support and attach

the GPU on the B200 M4 motherboard. See the three components of the option kit in the following figure:

Removing an adapter card is the reverse of installing it. You might find it helpful when removing

the connector from the motherboard to gently rock the board along the length of the connector until

it loosens.

Installing the NVIDIA M6 GPU Adapter Card

Servicing a Blade Server