Cisco UCS B260 M4 Kurulum ve Servis Notu - Sayfa 20
Sunucu Cisco UCS B260 M4 için çevrimiçi göz atın veya pdf Kurulum ve Servis Notu indirin. Cisco UCS B260 M4 46 sayfaları. Blade server
Ayrıca Cisco UCS B260 M4 için: Kurulum ve Servis Notu (50 sayfalar)
Sayfayı Yazdır
Powering Off a Blade Server
Powering Off a Blade Server
You can also shut down servers remotely using Cisco UCS Manager or CIMC. For details, see the
Tip
Configuration Guide for the version of Cisco UCS Manager that you are using. The configuration guides
are available at the following URL:
and_configuration_guides_list.html
Procedure
Step 1
If you are local to the server, check the color of the Power Status LED for each server in the chassis that you
want to power off.
• Green indicates that the server is running and must be shut down before it can be safely powered off.
• Amber indicates that the server is already in standby mode and can be safely powered off. Go to Step
Step 2
If you previously enabled front power button control through Cisco UCS Manager, press and release the
Power button, then wait until the Power Status LED changes to amber. Otherwise, you cannot press the front
power button because it is disabled by default.
The operating system performs a graceful shutdown and the server goes to standby mode.
Caution
Step 3
(Optional) If you are shutting down all blade servers in a chassis, disconnect the power cords from the chassis
to completely power off the servers.
Step 4
Remove the appropriate servers from the chassis.
Removing a Blade Server from the Chassis
You must power off the blade server or decommission it using Cisco UCS Manager before physically removing
the blade server from the chassis.
Procedure
Step 1
Turn off the blade server using either Cisco UCS Manager or the power button.
Step 2
If you are removing a UCS B460 M4 blade server, completely loosen the captive screws on the UCS Scalability
Connector and remove the connector by pulling it away from the two UCS B260 blade modules. If you are
Cisco UCS B260 M4 and B460 M4 Blade Server Installation and Service Note for Servers with E7 v4 CPUs
12
Go to Step 2.
3.
To avoid data loss or damage to your operating system, you should always invoke a graceful
shutdown of the operating system.
http://www.cisco.com/en/US/products/ps10281/products_installation_
Installing a Blade Server