Cisco UCS B260 M4 Kurulum ve Servis Notu - Sayfa 21
Sunucu Cisco UCS B260 M4 için çevrimiçi göz atın veya pdf Kurulum ve Servis Notu indirin. Cisco UCS B260 M4 46 sayfaları. Blade server
Ayrıca Cisco UCS B260 M4 için: Kurulum ve Servis Notu (50 sayfalar)
Sayfayı Yazdır
Installing a Blade Server
removing a UCS B260 M4 blade server, you do not need to remove the UCS Scalability Terminator prior to
removing the UCS B260 M4 blade server.
Step 3
Completely loosen the captive screws on the front of the blade.
Step 4
Remove the blade from the chassis by pulling the ejector levers on the blade until it unseats the blade server.
Step 5
Slide the blade part of the way out of the chassis, and place your other hand under the blade to support its
weight.
Step 6
Once removed, place the blade on an antistatic mat or antistatic foam if you are not immediately reinstalling
it.
Step 7
If the blade server slot is to remain empty, reinstall the slot divider and install two blade server blanking
panels.
Server Troubleshooting
For general troubleshooting information, see the
Cisco UCS B260 M4 and B460 M4 Blade Server Installation and Service Note for Servers with E7 v4 CPUs
Cisco UCS Manager Troubleshooting Reference
Server Troubleshooting
Guide.
13