DIGM Technology GSM-0308WPC Kullanıcı Kılavuzu - Sayfa 6
Kontrolör DIGM Technology GSM-0308WPC için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DIGM Technology GSM-0308WPC 9 sayfaları. Gsm water pump controller and monitoring system
Sayfayı YazdırGSM-0308WPC User Manual
Technical Parameter
•
Power Supply: Single Phase 220V‐240V 50/60Hz
•
GSM Frequency: GSM900/1800Mhz (Optional GSM850/900/1800/1900Mhz)
•
Device Power: <2W
•
Backup Battery: 7.4V/600mAH Lithium Polymer Battery
•
Maximum Load For Control: NO: 10A / 277VAC, NC: 12A / 125VAC
•
Remote Monitoring Distance: GSM network coverage area
•
Physical Casing Dimension: 180mm x 140mm x 60mm
•
Enclosure IP Rating: IP65
Setup via SMS Command
1.
Administrator
1.1
Temporary Administrator Privilege:
*100*AAAAAA#
Setting up a Temporary Administrator Privilege for Programming Mode:
AAAAAA = 6 Digits Password
Default Password = 123456
By using this commando, you will obtain administrator privilege for 10 Minutes.
That means you can do all programming within those 10 Minutes.
If you add your tel. no. in the administrator list, you do not need this function anymore.
If another uses same commando within the 10 Minutes, then you will lose your Administrator
privilege.
All tel. no. on the Administrator list have full control over the unit at all time.
1.2
Changing a Password:
*100*AAAAAA*BBBBBB#
Change the password.
AAAAAA = 6 Character Old Password
BBBBBB = 6 Character New Password.
At the same time, it will get the Administrator Privilege.
Example: Send *100*123456*obs123#, the system will change the admin to obs123
6 | P a g e