Epson LQ-1070+ Ürün Bilgi Kılavuzu - Sayfa 2
Yazıcı Aksesuarları Epson LQ-1070+ için çevrimiçi göz atın veya pdf Ürün Bilgi Kılavuzu indirin. Epson LQ-1070+ 8 sayfaları. Product support bulletin(s)
Ayrıca Epson LQ-1070+ için: Ürün Destek Bülteni (20 sayfalar), Ürün Destek Bülteni (5 sayfalar), Ürün Bilgi Kılavuzu (8 sayfalar), Kurulum Kılavuzu (1 sayfalar), Ürün Destek Bülteni (16 sayfalar)
Sayfayı Yazdır
LQ-1070+
Dimensions and weight:
Height
Width
Depth
weight
Electrical
AC 120 V (120 V model)
Rated voltage:
AC 103.5 to 132 V (120 V model)
Input voltage range:
2.0 A (120 V model)
Rated current:
(during self-test printing in draft mode,
Power consumption:
at 10 cpi) Approx. 36 W (120 V model)
Rated frequency range: 50 to 60 Hz
Insulation resistance: 10 MR minimum (at DC 500 V between AC
power line and chassis)
Dielectric strength (between AC line and chassis):
120 V model:
AC 1.0 kV (rms), 1 minute
or AC 1.2 kV (rms), 1 second
Environmental
Operation: 5" to 35°C (41" to 95°F)
Temperature:
Storage: -30" to 60°C (-22" to 140°F)
Operation: 10% to 80% RH without
Humidity:
condensation
Storage: 5% to 85% RH without condensation
Paper
Single sheets:
Width
148 to 420 mm (5.8 to 16.5 inches)
front
182 to 364 mm (7.2 to 14.3 inches)
364 mm (14.3 inches) maximum
Thickness
0.065 to 0.14 mm (0.0025 to 0.0055 inches)
weight
52.3 to 90 g/m2 (14 to 24 lb)
Single-sheet multi-part fms:
Width
182 to 364 mm (7.2 to 14.3 inches)
257 mm to 297 mm (10.1 to 11.7 inches)
copies
Four sheets (1 original plus up to 3 copies)
0.12 to 0.32 mm (0.0047 to 0.012 inches)
Weight
40 to 58 g/m2 (12 to 15 lb) per sheet
Load single-sheet multi-part forms only
l
into the front slot.
Use only carbonless multi-part forms.
l
Continuous paper:
Width
101 to 407 mm (4 to 16 inches) for LQ-1070+
copies
Four sheets (1 original plus up to 3 copies)
0.065 to 0.10 mm (0.0025 to 0.0039 inches) for
one sheet
0.065 to 0.32 mm (0.0025 to 0.012 inches) total
Weight
52.3 to 82 g/m2 (14 to 22 lb) for one sheet
40 to 58 g/m2 (12 to 15 lb) per sheet in multi-
part forms
Use only carbonless multi-part forms.
l
LQ-1070+ - 2
609 mm (24.0 inches)
9.5 kg (21.0 lb)
Labels (continuous only):
Size
Thickness
Envelopes:
Size
weight
Printable area:
Single sheets
A The minimum top margin
is 8.5 mm (0.33 inches).
B T h e rninhum left and
(0.12 inches). However,
the maximum printable
width is 345 mm
(13.6 inches).
C The minimum bottom
margin is 13.5 mm
(0.53 inches).
Continuous paper
A The minimum top and
bottom margins (above
and below the perforation)
are 9 mm (0.35 inches).
B T h e minimum left and
right margins are 13 mm
(0.51 inches). However,
the maximum printable
width is 345 mm
(13.6 inches).
Envelopes
A The minimum top
margin is 8.5 mm
(0.33 inches).
B T h e minimum left
and right margins
are 3 mm (0.12 inches).
C The minimum bottom
margin is 13.5 mm
(0.53 inches).
7/20/93
63.5 x23.8mm(2?4~15/16 inches)
101 x 23.8 mm (4 x 15/16 inches)
101 x 27 mm (4 x 17/16 inches)
0.07 to 0.09 mm (0.0028 to 0.0031 inches) for
backing sheet
0.16 to 0.19 mm (0.0063 to 0.0075 inches) total
Use continuous type labels only.
l
Use labels only under normal temperature
l
and humidity conditions.
No. 6-166 x 92 mm (6.5 x 3.6 inches)
No. 10-240 x 104 mm (9.5 x 4.1 inches)
0.16 to 0.52 mm (0.0063 to 0.0197 inches)
45 to 91 g/m2 (12 to 15 lb)
Use envelopes only under normal
l
temperature and humidity conditions.
Insert envelopes into the top slot only.
l
Printable area
I
24-Pin Printers