Argosy Simply45 Fesih Talimatları - Sayfa 3

Kıvrım aleti Argosy Simply45 için çevrimiçi göz atın veya pdf Fesih Talimatları indirin. Argosy Simply45 4 sayfaları.

Data

Insert the cable with the Bar45

into the plug allowing the wires to come out through the front of the plug as shown above. The S45-1750P plug is designed

to accommodate the insertion of large diameter cables up to 8.0mm (0.315"). Work the cable jacket into the plug until fully inserted. Looking from underneath

the plug, the cable jacket should meet or come close to the horizontal line (see above). Make sure the drain wire remains straight down the cable jacket.

STEP 8

Insert the loaded plug into the Simply45

Tool (Part No: MA-99-9951). Make sure to completely insert the plug

into the crimper socket.

Verify that the wires are still correctly aligned to the pattern. Slide the S45-1750P metal shell over the plug body as shown above. Press-In on the bottom

of the plug as you attach the shell. This will allow the plug to snap into the metal shell. The drain wire should remain straight back against the cable jacket

and come out of the back of the metal shell and extend past the external ground arm.

+44 1844 202101

All products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.

Connectors

Termination Instructions

STEP 7

Heavy Duty RJ45 Crimp

STEP 10

[email protected]

Simply45

STEP 9

Compress the crimper handles all the way down with one swift and

ﬁ rm motion until the handles release.

argosycable.com

– CAT6A STP

PN: FA-02-1750