Argosy Simply45 Fesih Talimatları - Sayfa 2

Kıvrım aleti Argosy Simply45 için çevrimiçi göz atın veya pdf Fesih Talimatları indirin. Argosy Simply45 4 sayfaları.

Data

Untwist and straighten the wire conductors. We recommend using the Simply45

straightener comb on the top. Next, align the wires in the correct alignment pattern (Type A or B). The B pattern is the most used today.

Bar45

– Following the pattern above, insert the top and bottom wires into the load bar. Once inserted, make sure the wires follow the pattern correctly.

Slide the Bar45

load bar as far back to the cable jacket as you can. Bar45

important for reducing the length of untwisted wire inside the RJ45 plug and improving termination performance). Next, using the S45-801 Flush Cutter,

trim the wire ends straight leaving about 0.75" (2.0cm) protruding past the front of the Bar45

+44 1844 202101

All products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.

Connectors

Termination Instructions

STEP 4

Adjustable LAN Cable Stripper (Part No: MC-99-9950) that has a wire

STEP 5

STEP 6

is designed to slide back almost touching the cable jacket. (NOTE: This is

[email protected]

Simply45

PN: FA-02-1750

load bar.

argosycable.com

– CAT6A STP