Argosy Simply45 Інструкції щодо припинення - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкції щодо припинення для Обтискний інструмент Argosy Simply45. Argosy Simply45 4 сторінки.
Data
Untwist and straighten the wire conductors. We recommend using the Simply45
straightener comb on the top. Next, align the wires in the correct alignment pattern (Type A or B). The B pattern is the most used today.
Bar45
– Following the pattern above, insert the top and bottom wires into the load bar. Once inserted, make sure the wires follow the pattern correctly.
®
Slide the Bar45
load bar as far back to the cable jacket as you can. Bar45
®
important for reducing the length of untwisted wire inside the RJ45 plug and improving termination performance). Next, using the S45-801 Flush Cutter,
trim the wire ends straight leaving about 0.75" (2.0cm) protruding past the front of the Bar45
+44 1844 202101
I
All products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
Connectors
Termination Instructions
STEP 4
Adjustable LAN Cable Stripper (Part No: MC-99-9950) that has a wire
®
STEP 5
STEP 6
is designed to slide back almost touching the cable jacket. (NOTE: This is
®
I
Simply45
PN: FA-02-1750
load bar.
®
argosycable.com
I
– CAT6A STP
®
I