ARGSeguridad ZDAS-300 Kullanıcı Kılavuzu - Sayfa 6

Güvenlik Sistemi ARGSeguridad ZDAS-300 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ARGSeguridad ZDAS-300 16 sayfaları. Luxury voiced lcd alarm system

ARGSeguridad ZDAS-300 Kullanıcı Kılavuzu
Wired/Wireless Smoke detector: (option)
The Smoke detector is used to detect potentially dangerous smoke emissions in the home.
Once the detector detects the presence of smoke as a danger and possible Fire Risk it will
transmit an alarm signal to the control panel and also activate its own integral local sounder.
Wired/Wireless Combustible Gas detector: (option)
The combustible gas detector will detect potentially dangerous gas emissions within its
location. It should be fitted in any area where there is a possibility or risk of Gas Leaks or
emissions.
Once The Combustible Gas detector detects unacceptable levels of combustible Gas it
will transmit an alarm signal to the Control Panel and also activate its own integral local
sounder.
Wiredless shock/vibration detector: (option)
Glass Break detector: (option)
The glass break detector should be placed at home where close to glass. When the glass
is broken, the detector could detect the particular frequency and then transmitting an alarm
signal to the control panel.

2 DESCRIPTION

2. 1 The Keypad

ARMED ON
= ARMED
PART ARMED ON
= PART ARMED
ALARM ON
= NEW ALARM LOG
ALARM FLASH
= ALARM OR COMMUNICATION
POWER ON
=AC POWER
POWER OFF
=BATTERY USING
Event/Disarm
Event LOG/Disarm
Prog
Program
Del/Sensor
Delete/Sensor check
Arm
Manual ARM or PART ARM
Figure 2:keypad description
3
*
voice prompt you how to operate
voice
for every step
9
RF transmit for wireless siren
RF out
recording the owner voice/
voice
0
playback the voice
OG M
Press (walk test) or Press & hold
#
up (alarm with/without sounder)
5 ZONE CONFIGURATION AND EXPLANATION
Zone 7 selected
M
SET
TYPE
1
1:watchdog zone
1
2
1:exit delay
3
1:entry delay
4
1:24 hours zone
1:sounder when alarming
5
6
1:armed zone
7
1:sensor in the zone
Zone 1 selected
SET
TYPE
The above shows Zone 1 is Configured to be a 24 hour zone, Active Sounder when
Arming and there are Sensors in this zone.
Zone 2 selected
SET
TYPE
The above shows Zone 2 is configured to be a panic zone, Active Sounder when Arming
and there are Sensors in this zone.
D
H
M
D
2
3
4
5
6
7
0:not a watchdog zone
0:no exit delay
0:no entry delay
0:not 24 hours zone
0:silent when alarming
0:part armed zone
0:no sensor in the zone
M
D
H
M
D
M
D
H
M
D
24