ARGSeguridad ZDAS-300 Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Sicherheitssystem ARGSeguridad ZDAS-300 herunter. ARGSeguridad ZDAS-300 16 Seiten. Luxury voiced lcd alarm system

Seite drucken

Wired/Wireless Smoke detector: (option)

The Smoke detector is used to detect potentially dangerous smoke emissions in the home.

Once the detector detects the presence of smoke as a danger and possible Fire Risk it will

transmit an alarm signal to the control panel and also activate its own integral local sounder.

Wired/Wireless Combustible Gas detector: (option)

The combustible gas detector will detect potentially dangerous gas emissions within its

location. It should be fitted in any area where there is a possibility or risk of Gas Leaks or

emissions.

Once The Combustible Gas detector detects unacceptable levels of combustible Gas it

will transmit an alarm signal to the Control Panel and also activate its own integral local

sounder.

Wiredless shock/vibration detector: (option)

Glass Break detector: (option)

The glass break detector should be placed at home where close to glass. When the glass

is broken, the detector could detect the particular frequency and then transmitting an alarm

signal to the control panel.

2 DESCRIPTION

2. 1 The Keypad

ARMED ON

= ARMED

PART ARMED ON

= PART ARMED

ALARM ON

= NEW ALARM LOG

ALARM FLASH

= ALARM OR COMMUNICATION

POWER ON

=AC POWER

POWER OFF

=BATTERY USING

Event/Disarm

Event LOG/Disarm

Prog

Program

Del/Sensor

Delete/Sensor check

Arm

Manual ARM or PART ARM

Figure 2:keypad description

voice prompt you how to operate

voice

for every step

RF transmit for wireless siren

RF out

recording the owner voice/

voice

playback the voice

OG M

Press (walk test) or Press & hold

up (alarm with/without sounder)

5 ZONE CONFIGURATION AND EXPLANATION

Zone 7 selected

SET

TYPE

1:watchdog zone

1:exit delay

1:entry delay

1:24 hours zone

1:sounder when alarming

1:armed zone

1:sensor in the zone

Zone 1 selected

SET

TYPE

The above shows Zone 1 is Configured to be a 24 hour zone, Active Sounder when

Arming and there are Sensors in this zone.

Zone 2 selected

SET

TYPE

The above shows Zone 2 is configured to be a panic zone, Active Sounder when Arming

and there are Sensors in this zone.

0:not a watchdog zone

0:no exit delay

0:no entry delay

0:not 24 hours zone

0:silent when alarming

0:part armed zone

0:no sensor in the zone