Motorola XiR Series Hızlı Referans Kartı - Sayfa 6

Radyo Motorola XiR Series için çevrimiçi göz atın veya pdf Hızlı Referans Kartı indirin. Motorola XiR Series 8 sayfaları. Digital mobile radios
Ayrıca Motorola XiR Series için: Hızlı Referans Kartı (2 sayfalar)

Motorola XiR Series Hızlı Referans Kartı
• Select
to send the message to
Forward
another subscriber/group alias or ID.
• Select
to edit the message before
Edit
sending it.
Initiating an Emergency Call or
Emergency Alert
1
Press the programmed Emergency button.
The Emergency Search Tone sounds. It is
temporarily muted when the radio transmits or
receives voice. The tone stops when the radio
exits Emergency mode.
NOTE: The Emergency Search Tone is an
optional feature, it can be enabled or
disabled via the CPS programming
software. This feature is disabled, if
Silent Emergency is enabled. The CPS
can also program tone to sound to
through the speaker of the radio (default)
or wired accessory. Check with your
dealer or system administrator to
determine how your radio has been
programmed.
2
If button is programmed to initiate an
Emergency Call, hold the microphone 1 to 2
inches (2.5 to 5.0 cm) from your mouth and
speak.
3
If button is programmed to initiate an
Emergency Alert, a positive indicator tone
sounds once the Emergency Alert begins to
broadcast on the site's Control Channel. The
English
display briefly shows, Emergency Alert
Successful.
NOTE: Depending on how your radio was
programmed, you may or may not have
to press the PTT button prior to
speaking. Also depending on how your
radio was programmed, you may or may
not hear a Talk Permit tone. Your radio
dealer can provide more information on
how your radio has been programmed
for Emergency.
Clearing the Received Emergency Call
(or Emergency Alert) Indications
If your radio has been programmed to provide an
Emergency Alert Tone upon receiving an
Emergency Call or Emergency Alert, you will
have to manually clear both the Emergency Alert
Tone and the Emergency Display indications.
The procedure is as follows:
1
To silence the Emergency Alert Tone, press
any button.
2
The display will continue to show information
about the Emergency Call (or Emergency
Alert) after the call (or alert) is over. Short
R
press the
button, then press the
programmed Emergency Off button to clear
the Emergency display indications. The
Emergency Off function is on the same
button used to start an Emergency Call (or
Emergency Alert). If Emergency On is a
short press, then Emergency Off is a long
press. If Emergency On is a long press, then
Emergency Off is a short press.
Enhanced Privacy
Press the programmed Privacy On/Off button to
toggle Enhanced Privacy on or off for the
selected channel position.
OR
Follow the procedure below.
1
S
Press the
button.
2
P
Q
Press
or
to locate the Utilities
option.
3
N
Press
to select Utilities.
4
P
Q
Press
or
(if necessary) to locate the
Radio Settings option.
5
N
Press
to select Radio Settings.
6
P
Q
Press
or
to locate the Enh.Privacy
N
option and press
to select.
7
The display shows Turn On or Turn Off,
depending on whether Privacy is currently
turned off or on.
8
N
Press
to toggle the current Privacy
Setting.
9
The display briefly shows Enh.Privacy On or
Enh.Privacy Off to indicate the new privacy
setting
NOTE: Toggling the privacy setting on or off
affects the currently selected channel
position only. The radio tracks the