Epson ProofPlus TM-H6000III Manuel - Sayfa 10
Etiket makinesi Epson ProofPlus TM-H6000III için çevrimiçi göz atın veya pdf Manuel indirin. Epson ProofPlus TM-H6000III 10 sayfaları. Ecc printer
Ayrıca Epson ProofPlus TM-H6000III için: Broşür (2 sayfalar), Teknik Özellikler (2 sayfalar), Broşür (6 sayfalar)
Sayfayı Yazdır
The interface settings are not the same on both the printer and computer. Run the
show the current settings on the printer. Check the computer side to see that settings are the same.
Settings can be changed on the printer using the
The printer selected in the software is not correct or the software doesn't support the printer in use.
No longer prints
The TM printer is turned off. Turn on the TM printer. Confirm the connection of the power supply unit
or the voltage of the commercial power.
The TM printer is offline. Turn the TM printer online.
The ERROR LED of the TM printer is on or flashing. Remove the error cause.
The printing port of the driver on the computer side is not specified correctly. Confirm the driver
setting on the computer side.
The printer is not online in Windows. Check the status of the printer in the Windows Control Panel, the
printer should show status as ready. Tip: try stopping and restarting the Print Spooler from the
Services applet of the Control Panel.
Printing is slow
There are problems with the computer. Printing speed may go down due to problems with the network
system or applications. Run the printer self test to confirm the printer is capable of printing at its
normal speed.
DIP
switches.
printer self test
to