Epson ProofPlus TM-H6000III Manuel - Sayfa 8

Etiket makinesi Epson ProofPlus TM-H6000III için çevrimiçi göz atın veya pdf Manuel indirin. Epson ProofPlus TM-H6000III 10 sayfaları. Ecc printer
Ayrıca Epson ProofPlus TM-H6000III için: Broşür (2 sayfalar), Teknik Özellikler (2 sayfalar), Broşür (6 sayfalar)

Sayfayı Yazdır

Testing the Printer

You should now be ready to test the printer by printing some text or by pressing the "Print Test Page" button in

the General Tab of the printer properties.

If the printer fails to print the test page then check:

1. Power cable is installed and the printer is turned on

2. Data cable is installed on the printer and the computer

3. Port settings are set the same on the printer (from the

4. The COM port selected in Windows is correct

5. The data cable has the right configuration for the printer and computer in use. Using the wrong data

cable is the most common problem with new installations. The printer will fail to print unless the cable

is compatible.

Utilities to Run on the Computer

You can verify connectivity by running the Epson Flash utility.

Epson Flash Utility

The Epson Flash Utility is normally installed along with the Epson printer drives. It is used to upload bitmaps to

Epson printers, but has a simple communication test which can check for basic connectivity between the

computer and the printer. Pressing the "Comm. Test" button on the Setup tab of the utility will give a go/no-go

Self

Test) and in Windows