ECI 1000-U LCD Kurulum Kılavuzu - Sayfa 7

Kontrolör ECI 1000-U LCD için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. ECI 1000-U LCD 18 sayfaları.

5 Introduction

This manual is intended to help facilitate the installation of ECI 1000U LCD Door Operator board made

by Electronic Controls, Inc. The audience of the material included in this manual is for the certified

installation personnel. The ECI 1000U LCD control board complies with modern performance

specifications and meets or exceeds code requirements. Installation and adjustments must meet local,

state and national codes.

The ECI 1000U LCD door controlled is a microprocessor-based board that controls all aspects of the door

motion including direction, velocity, deceleration and force.

The ECI 1000U LCD replaces the Elevator Components Industries 1001-1300, 1000-500 and 1000-1400

door controls boards.

The motor controller is a unique design for simple installation and reliable performance. It provides for

total control and adjustment through the entire door cycle and includes nudging. The door are held under

power while standing closed, running and while standing open. There are no potentiometers to adjust

speeds. All adjustments are performed by changing settings displayed on the LCD screen.

120VAC single phase

48VDC motor output

Controller interface signals 120VAC/VDC or 24VDC

F1 – 250V/3A AGC

F2 – 250V/2A AGC

F3 – 250V/9A GBB

L1A – AC neutral

L2A – AC hot

24B – 24VDC power input for 24VDC controller interface levels. For 120VAC controller this

input is tied directly to F1 of X11

F1 – Fused L2A (3A fuse)

COM – 24VDC return from controller power source. For 120VAC controller voltages this input

is tied directly to L1A of X11

L1A – unfused L1A

24B2 -

ECI 1000-U LCD Installation Manual

Electronic Controls, Inc.

7073 North Atlantic Ave. Cape Canaveral, FL 32920

800-633-9788

www.eciamerica.com

P a g e

| 7