Toshiba Carrier MMC-AP0181H2UL Kurulum Kılavuzu - Sayfa 5

Klima Toshiba Carrier MMC-AP0181H2UL için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Toshiba Carrier MMC-AP0181H2UL 18 sayfaları. Air conditioner (multi type)

Sayfayı Yazdır

Ceiling type

Removing wire guard

Remove the screws (2 pcs.) which are fixing the

wire guard.

Remove the clamp fixing screws and remove the

wire guard.

Clamps

Screw

CAUTION

Attach back the wire guard once indoor unit is installed.

Remove the 2 screws fixing the wire guard and hung the

wire guard with the clamps during a service.

Wire guard

7-EN

Installation Manual

Removal of side panel

After removing the side panel fixing screws (1

each at right and left), slide the side panel forward

and then remove it.

Protector

Side panel

Level louver

Slide forward.

Removal of protective vinyl

Peel out the protective vinyl on the level louver.

Removal of protector

Remove the protector (1 pcs.) of the fan.

(AP024 only)

Ceiling type

Installation

REQUIREMENT

Strictly comply with the following rules to prevent damage of the indoor units and human injury.

• Do not put a heavy article on the indoor unit. (Even units are packaged)

• Carry in the indoor unit as it is packaged if possible. If carrying in the indoor unit unpacked by necessity, use buffering

cloth or other soft cloth to not damage the unit.

• To move the indoor unit, hold the hooking metals (4 positions) only.

Do not apply force to the other parts (refrigerant pipe, drain pan, foamed parts, or resin parts).

• Carry the package by two or more persons, and do not bundle it with plastic band at positions other than specified.

External view

1.5" (39)

Upper pipe draw-out port (knockout)

Hole for remote control wires (knockout)

Conduit hole

(Hole for power supply cable. knockout)

3.3" (84)

Refrigerant pipe

Left drain size

(Liquid side ØC)

Refrigerant pipe (Gas side ØD)

B (Hanging position)

5.3" (135)

Hanging bolt

Ceiling surface

Pipe hole on wall

Unit

(Ø3.9" (100) hole)

– 4 –

Installation Manual

2.0" (52)

6.6" (167)

8.5" (216)

Pipe draw-out port

8.3" (210)

(knockout)

4.3" (110)

3.0" (76)

Drain port VP20

(Inner dia. Ø1.0" (26), hose

4.1" (105)

attached)

Drain pipe

connecting

port

3.0" (75)

3.8" (97)

5.7" (146)

Hole for remote control wires

13.7" (347)

Conduit hole

12.2" (311)

(knockout)

10.3" (262)

3.3" (84)

Hole for power supply cable

Outside air take-in port (Duct sold separately)

Knockout hole Ø3.6" (92))

Wireless sensor mounting section

Model MMC-

35.8"

33.7"

AP018

(910)

(855)

46.5"

44.3"

AP024

(1180)

(1125)

62.8"

60.6"

AP036, AP042

(1595)

(1540)

Unit: in (mm)

Left drain pipe

draw-out port

(knockout)

Unit: in (mm)

Ø1/4"

Ø1/2"

(6.4)

(12.7)

Ø3/8"

Ø5/8"

(9.5)

(15.9)

8-EN