Epson PowerLite 737c Ürün Bilgileri - Sayfa 18

Yazılım Epson PowerLite 737c için çevrimiçi göz atın veya pdf Ürün Bilgileri indirin. Epson PowerLite 737c 24 sayfaları. Release of check tool for network projectors v1.00 for windows
Ayrıca Epson PowerLite 737c için: Kullanıcı Kılavuzu (42 sayfalar), Kullanım Kılavuzu (36 sayfalar), Hızlı Kurulum Kılavuzu (2 sayfalar), Kullanım Kılavuzu (47 sayfalar), Parça Listesi (1 sayfalar), Ürün Destek Bülteni (30 sayfalar), Kurulum Kılavuzu (19 sayfalar), Kullanıcı Kılavuzu (1 sayfalar), Ürün Destek Bülteni (25 sayfalar), Ürün Destek Bülteni (38 sayfalar), Ürün Destek Bülteni (12 sayfalar), Ürün Destek Bülteni (42 sayfalar), Ürün Destek Bülteni (22 sayfalar), Ürün Destek Bülteni (28 sayfalar), Ürün Destek Bülteni (41 sayfalar), Ürün Destek Bülteni (34 sayfalar), Ürün Destek Bülteni (38 sayfalar), Ürün Destek Bülteni (28 sayfalar), Ürün Destek Bülteni (15 sayfalar), Ürün Destek Bülteni (22 sayfalar), Hızlı Kurulum (2 sayfalar)

Sayfayı Yazdır

Epson PowerLite 737c Projector

Managing Projectors from a Remote

Computer

The software included with your projector lets you monitor

and control projector(s) from a remote computer. These

features are intended for use by network administrators.

❏ Use EMP Monitor to see your projectors' status, switch

image sources, and control basic settings.

❏ Use the mail notification function to receive e-mail alerts

about possible problems.

❏ Use a network management utility running SNMP, such as

™

HP OpenView,

to manage your facility's equipment from

a pre-existing system.

Make sure you have installed the EMP Monitor software

(included on the projector's CD-ROM) on the computer you

want to use to monitor your projectors. (See the User's Guide

for instructions.)

Note:

Your computer must be running Microsoft Windows XP, 2000,

Me or 98SE.

Opening and Closing EMP Monitor

To start EMP Monitor, click

Programs > EPSON Projector > EMP Monitor

If you've added the program to the Startup programs folder, it

may already be open. If so, click the icon in the system tray on

the lower-right corner of your screen to display the EMP

Monitor window:

To close EMP Monitor, right-click the program icon shown

above, then select

Exit

Epson PowerLite 737c Projector

Start > Programs

All

Click here to start EMP Monitor

Registering Projectors in EMP Monitor

Before you can monitor a projector, you have to register it.

Follow these steps:

1. Open EMP Monitor. You see this screen:

Click here

2. Click

3. Click

detect to locate projectors currently operating

Auto

on the network. Or click

projector's name and network address.

Note:

If Auto detect fails to find the projector, your projector may

not be connected or configured correctly for the network.

Any projectors found on the network are listed:

4. Select each projector you want to add by clicking its name

and clicking

. When you're done, click

Add

2/05

. You see this screen:

Click here

and enter the

Manual registration

Click here