Epson PowerLite 765c Parça Kılavuzu - Sayfa 19

Yazılım Epson PowerLite 765c için çevrimiçi göz atın veya pdf Parça Kılavuzu indirin. Epson PowerLite 765c 26 sayfaları. Release of check tool for network projectors v1.00 for windows
Ayrıca Epson PowerLite 765c için: Kullanıcı Kılavuzu (42 sayfalar), Kullanım Kılavuzu (36 sayfalar), Kullanım Kılavuzu (47 sayfalar), Parça Listesi (1 sayfalar), Ürün Destek Bülteni (30 sayfalar), Hızlı Kurulum (2 sayfalar), Kurulum Kılavuzu (19 sayfalar), Kullanıcı Kılavuzu (1 sayfalar), İşlev Kılavuzu (5 sayfalar), Ürün Destek Bülteni (25 sayfalar), Ürün Destek Bülteni (38 sayfalar), Ürün Destek Bülteni (12 sayfalar), Ürün Destek Bülteni (42 sayfalar), Ürün Destek Bülteni (22 sayfalar), Ürün Destek Bülteni (28 sayfalar), Ürün Destek Bülteni (41 sayfalar), Ürün Destek Bülteni (34 sayfalar), Ürün Destek Bülteni (38 sayfalar), Ürün Destek Bülteni (28 sayfalar), Ürün Destek Bülteni (15 sayfalar), Ürün Destek Bülteni (22 sayfalar), Hızlı Kurulum (2 sayfalar)

Sayfayı Yazdır

Managing Projectors from a Remote

Computer

The software included with your projector lets you monitor and

control projector(s) from a remote computer. These features are

intended for use by network administrators.

Use EMP Monitor (Windows only) to see your projectors'

status, switch image sources, and control basic settings.

Use the mail notification function to receive e-mail alerts

about possible problems.

Use a network management utility running SNMP, such as

™

HP OpenView,

to manage your facility's equipment from

a pre-existing system.

You can also use NS Connection to register up to 16 projectors

as a group. This allows you to provide quick and easy access to

these projectors from other computers.

Make sure you have installed the EMP Monitor software

(included on the projector's CD-ROM) on the computer you

want to use to monitor your projectors. (See the User's Guide for

instructions.)

Note:

Your computer must be running Microsoft Windows XP, 2000, Me

or 98SE.

Opening and Closing EMP Monitor

To start EMP Monitor, click

Programs > EPSON Projector > EMP Monitor

If you've added the program to the Startup programs folder, it

may already be open. If so, click the icon in the system tray on

the lower-right corner of your screen to display the EMP

Monitor window:

To close EMP Monitor, right-click the program icon shown

above, then select

Exit

Start > Programs

All

Click here to start EMP Monitor

Epson PowerLite 755c/765c Projector

Registering Projectors in EMP Monitor

Before you can monitor a projector, you have to register it.

Follow these steps:

1. Open EMP Monitor. You see this screen:

Click here

2. Click

3. Click

Auto detect

on the network. Or click

projector's name and network address.

Note:

If Auto detect fails to find the projector, your projector may not

be connected or configured correctly for the network.

Any projectors found on the network are listed:

4. Select each projector you want to add by clicking its name

and clicking

. When you're done, click

Add

8/05

Epson PowerLite 755c/765c Projector

. You see this screen:

to locate projectors currently operating

Manual registration

Click here

and enter the

Click here