Epson PowerLite 765c Parça Kılavuzu - Sayfa 21

Yazılım Epson PowerLite 765c için çevrimiçi göz atın veya pdf Parça Kılavuzu indirin. Epson PowerLite 765c 26 sayfaları. Release of check tool for network projectors v1.00 for windows
Ayrıca Epson PowerLite 765c için: Kullanıcı Kılavuzu (42 sayfalar), Kullanım Kılavuzu (36 sayfalar), Kullanım Kılavuzu (47 sayfalar), Parça Listesi (1 sayfalar), Ürün Destek Bülteni (30 sayfalar), Hızlı Kurulum (2 sayfalar), Kurulum Kılavuzu (19 sayfalar), Kullanıcı Kılavuzu (1 sayfalar), İşlev Kılavuzu (5 sayfalar), Ürün Destek Bülteni (25 sayfalar), Ürün Destek Bülteni (38 sayfalar), Ürün Destek Bülteni (12 sayfalar), Ürün Destek Bülteni (42 sayfalar), Ürün Destek Bülteni (22 sayfalar), Ürün Destek Bülteni (28 sayfalar), Ürün Destek Bülteni (41 sayfalar), Ürün Destek Bülteni (34 sayfalar), Ürün Destek Bülteni (38 sayfalar), Ürün Destek Bülteni (28 sayfalar), Ürün Destek Bülteni (15 sayfalar), Ürün Destek Bülteni (22 sayfalar), Hızlı Kurulum (2 sayfalar)

Epson PowerLite 765c Parça Kılavuzu

Controlling Your Projectors

The control buttons in the upper-right of the EMP Monitor
screen let you turn the projectors on and off and select video
signals. (Hold the mouse pointer over a button to see a
description of its meaning.) Select the projector you want to
operate (with the mouse pointer) before clicking one of the
buttons.
If you need the most current status information about your
projectors, click the
Refresh
The following table explains the control button functions.
Control buttons
Turns the projector on
Turns the projector off
Changes the video signal to the Computer/
Component 1 port
Changes the video signal to the Computer/
Component 2 port
Changes the video signal to the S-Video port
Changes the video signal to the Video port
Switches the display to EasyMP
Note:
To turn on a projector when it's in standby mode (plugged in but
not projecting), first select
Network ON
setting in the projector's Extended menu.
Control buttons
button.
as the
Standby Mode
Epson PowerLite 755c/765c Projector

Configuring the Monitoring Interval

You can select how often EMP Monitor checks the
projector status:
1. From the Tool menu, select
screen.
Note:
If you want EMP Monitor to run whenever you start your
computer, click
Add to Startup
2. Select the desired update interval and click

Understanding the Notification Messages

If a projector experiences a problem, it can send an e-mail
message to each of the addresses you provided using EMP
NetworkManager. The message includes the heading "Epson
Projector" in the subject line. The body of the message contains
the name of the projector, the projector's IP address, and a
description of the problem. The problem descriptions are
similar to the errors reported by EMP Monitor listed on
page 20.
If a plus (+) sign appears before the description, it indicates that
a problem has occurred. A minus (–) sign appears when the
problem is resolved.
Note:
If a projector develops a critical problem, it may not be possible for
it to report the error.
8/05
Epson PowerLite 755c/765c Projector
. You see this
Configuration
.
.
OK
21
-