Philips 107S63 Kullanıcı Kılavuzu - Sayfa 5

Monitör Philips 107S63 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Philips 107S63 46 sayfaları. 17" real flat sxga crt monitor
Ayrıca Philips 107S63 için: Teknik Özellikler (2 sayfalar)

Philips 107S63 Kullanıcı Kılavuzu

INSTALLATION INSTRUCTIONS

Swivel Base

To attach the swivel base to the monitor, do the following:
• Carefully turn the monitor on its side or upside down. ( see figure 1 )
• Locate the cavities at the bottom front of the monitor.
• Insert the pegs on the swivel base into these cavities. Push the swivel base
forward until the swivel base locks in place.
• To remove the swivel base, hold the bottom of the swivel base, then push
it out.
Figure 1

Power Cord

Power Source:
1. Make sure the power cord is the correct type that required in your area.
2. This monitor has a universal power supply that allows operation in either
100/120V AC or 220/240V AC voltage area. ( No user adjustment is
required. )
3. Connect the power cord into your monitor's power input socket, and then
plug the other end into a 3-pin AC power outlet. The power cord may be
connected to either a wall power outlet or the power outlet socket on your
PC, depending on the type of power cord supplied with your monitor.
Install
Installing and Removing the Swivel Base
3
Remove