Philips 107S63 Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для Монітор Philips 107S63. Philips 107S63 46 сторінок. 17" real flat sxga crt monitor
Також для Philips 107S63: Технічні характеристики (2 сторінок)

Друкувати сторінку

INSTALLATION INSTRUCTIONS

Swivel Base

To attach the swivel base to the monitor, do the following:

• Carefully turn the monitor on its side or upside down. ( see figure 1 )

• Locate the cavities at the bottom front of the monitor.

• Insert the pegs on the swivel base into these cavities. Push the swivel base

forward until the swivel base locks in place.

• To remove the swivel base, hold the bottom of the swivel base, then push

it out.

Figure 1

Power Cord

Power Source:

1. Make sure the power cord is the correct type that required in your area.

2. This monitor has a universal power supply that allows operation in either

100/120V AC or 220/240V AC voltage area. ( No user adjustment is

required. )

3. Connect the power cord into your monitor's power input socket, and then

plug the other end into a 3-pin AC power outlet. The power cord may be

connected to either a wall power outlet or the power outlet socket on your

PC, depending on the type of power cord supplied with your monitor.

Install

Installing and Removing the Swivel Base

Remove