Epson Stylus Pro 10600 - UltraChrome Ink - Stylus Pro 10600 Print Engine Hızlı Referans - Sayfa 7

Yazılım Epson Stylus Pro 10600 - UltraChrome Ink - Stylus Pro 10600 Print Engine için çevrimiçi göz atın veya pdf Hızlı Referans indirin. Epson Stylus Pro 10600 - UltraChrome Ink - Stylus Pro 10600 Print Engine 10 sayfaları. Product support bulletin
Ayrıca Epson Stylus Pro 10600 - UltraChrome Ink - Stylus Pro 10600 Print Engine için: Broşür ve Teknik Özellikler (8 sayfalar), Şartname Sayfası (8 sayfalar), Hızlı Kurulum Kılavuzu (34 sayfalar), Ürün Bilgileri (17 sayfalar), Teknik Özellikler (4 sayfalar), Ürün Destek Bülteni (44 sayfalar), Montaj ve Kurulum Kılavuzu (14 sayfalar)

Replacing Ink Cartridges (Continued)

Carefully pull the empty cartridge straight out of the

printer.

If ink gets on your hands, wash them

thoroughly with soap and water. If ink gets into

your eyes, flush them immediately with water.

Make sure the replacement cartridge is the correct

color, and remove it from its package.

If you're using Archival or UltraChrome ink, shake the

cartridge gently before installing it.

Hold the cartridge so the arrow mark is on the left

side and points to the rear of the printer. Then insert

the cartridge into the slot. Don't force it.

If you can't insert the cartridge smoothly, you

may have the wrong cartridge. Check the

package and product code.

Push the cartridge clamp back into the locked

position. Make sure the corresponding

goes off.

If the Ink Out light remains on, the cartridge

may not be installed correctly. Remove the

cartridge and then reinsert it as described

above.

Close the ink compartment cover.

light

Ink Out