Epson Stylus Pro 10600 - UltraChrome Ink - Stylus Pro 10600 Print Engine Referensi Cepat - Halaman 7

Jelajahi secara online atau unduh pdf Referensi Cepat untuk Perangkat lunak Epson Stylus Pro 10600 - UltraChrome Ink - Stylus Pro 10600 Print Engine. Epson Stylus Pro 10600 - UltraChrome Ink - Stylus Pro 10600 Print Engine 10 halaman. Product support bulletin
Juga untuk Epson Stylus Pro 10600 - UltraChrome Ink - Stylus Pro 10600 Print Engine: Brosur & Spesifikasi (8 halaman), Lembar Spesifikasi (8 halaman), Panduan Instalasi Cepat (34 halaman), Informasi Produk (17 halaman), Spesifikasi (4 halaman), Buletin Dukungan Produk (44 halaman), Panduan Perakitan dan Pengaturan (14 halaman)

Halaman Cetak
Epson Stylus Pro 10600 - UltraChrome Ink - Stylus Pro 10600 Print Engine Referensi Cepat
Replacing Ink Cartridges (Continued)
Replacing Ink Cartridges (Continued)
3
Carefully pull the empty cartridge straight out of the
printer.
If ink gets on your hands, wash them
thoroughly with soap and water. If ink gets into
your eyes, flush them immediately with water.
4
Make sure the replacement cartridge is the correct
color, and remove it from its package.
If you're using Archival or UltraChrome ink, shake the
cartridge gently before installing it.
5
Hold the cartridge so the arrow mark is on the left
side and points to the rear of the printer. Then insert
the cartridge into the slot. Don't force it.
If you can't insert the cartridge smoothly, you
may have the wrong cartridge. Check the
package and product code.
6
Push the cartridge clamp back into the locked
position. Make sure the corresponding
goes off.
If the Ink Out light remains on, the cartridge
may not be installed correctly. Remove the
cartridge and then reinsert it as described
above.
7
Close the ink compartment cover.
7
light
Ink Out