Philips BTM2056 Kullanıcı Kılavuzu - Sayfa 12
Stereo sistemi Philips BTM2056 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Philips BTM2056 19 sayfaları. Philips btm2056 micro music system short user manual
Ayrıca Philips BTM2056 için: Hızlı Kılavuz (3 sayfalar), Kullanıcı Kılavuzu (21 sayfalar), Kısa Kullanım Kılavuzu (2 sayfalar), Kısa Kullanım Kılavuzu (2 sayfalar), Montaj Talimatları (2 sayfalar)
Sayfayı Yazdır
5 Listen to FM
radio
Tune to FM radio stations
Note
•
Position the antenna as far as possible from TV, VCR, or
other radiation source.
•
Make sure that you have connected and fully extended
the supplied FM antenna.
1
Press FM to select FM tuner mode.
2
Press and hold
» [SEARCH] (search) is displayed.
» The system tunes to an FM station
with strong reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a station with weak signal:
Press
/
repeatedly until you find good
reception.
Program FM radio stations
automatically
Note
•
You can program a maximum of 20 preset FM radio
stations.
In FM tuner mode, press and hold PROG for 3
seconds.
» [AUTO] (auto) is displayed.
» The system stores all the FM radio stations
automatically, and then broadcasts the first
preset radio station.
/
for 3 seconds.
Program FM radio stations
manually
1
In tuner mode, tune to an FM radio station.
2
Press PROG to activate programming
mode.
» [PROG] (program) blinks.
3
Press
or
repeatedly to select a
channel number.
4
Press PROG again to confirm.
5
Repeat steps 1-4 to store other FM
stations.
Note
•
To remove a pre-stored station, store another station
in its place.
Select a preset radio station
In tuner mode, press
buttons to select a preset number.
Select stereo/mono broadcast
Note
•
Stereo broadcast is the default setting for tuner mode.
•
For stations with weak signals: to improve the reception,
change to monaural sound.
In FM tuner mode, press
mono and stereo broadcast.
/
or the numeric
to switch between
EN
12